TIP: For a cool tank keep the unit out of direct sunlight and away from sources of heat.
Fill with COLD WATER from the fridge. Regularly top up with COLD / COOLED WATER.
Remove the milk storage lid
and replace your bottle onto
the bottle stand.
Always check that the amount dis-
pensed is consistent with the size of
feed you have selected on the dial.
Add the sterilised teat, screw ring and
hood and shake*
Press the start/stop button again.
The red light will go out and the green
light will flash. If this button is not
pressed within 2 minutes of the hot
water being dispensed a long beep
will sound.
For your child's safety always check
food temperature
before feeding by testing on a sensitive
part of your skin.
IF THE ALARM
SOUNDS YOU
SHOULD DISCARD
THE FEED AND
REPEAT THE
PROCESS FROM
STEP 1.
YOUR BOTTLE IS NOW
READY TO SERVE.
Make sure you discard any
unwanted feed as per the formula
manufacturer's recommendation."
Wait whilst the remainder of
water is dispensed. Once
completed, there will be a
double beep and the green
light will change to solid.
HOW TO STOP THE PERFECT PREP
MACHINE
If at any point you need to stop the
Perfect Prep machine you can do so by
pressing the start/stop button. The pump
may continue to run for a few seconds
and the green light will illuminate to
show that the process has ended. It will
not be possible to restart the machine
for 20 seconds. Should you have to stop
the Perfect Prep machine please discard
the feed.
*If using Tommee Tippee Advanced Anti Colic
Bottles, please visit our website for instructions
on how to make a feed at tommeetippee.com
7