Display And Operating Elements; Leds On Charger; Glossary - Honsel Rivdom eVNG 2 Instrucciones De Uso

Dimensions
See figure a
Fig . Dimensions in mm
A 25
B 69
C 278
D 324
E 71
F 75
2 .5 DISPLAY AND OPERATING
ELEMENTS
Battery: 80%
Force: 10A
Spindle: T
Standby: 200S
Warnings: On
File: 00
Counter: Off
Service: 300.000
6
OK OK
5
Figure g

Display and operating elements

No . Designation
1 Screen, see chapter 2.10
2 Arrow up key
3 Arrow right key
4 Arrow down key
5 OK key
6 Arrow left key
2 .6

LEDS ON CHARGER

The LEDs on the charger are
marked LED 1 and LED 2.
LED 1
Green
Green
Green
Green
Green
flashing
fast
Green
Green
1
2 .7

GLOSSARY

Blind rivet nut setting process: see figure e
Blind rivet bolt setting process: see figure f
2
No .
1
3
4
Fig. e,
2
Fig. f,
2
3
4
LED 2 Description
OFF Ready
Red Active
flashing
slowly
Yellow 90 % charged
Red Charging completed
OFF Charger fault
Red • Battery not inserted
flashing correctly
fast • Temperature
< 0 °C or > 45 °C
Yellow Battery fault
flashing
fast
Term Description
Nosepiece Outermost component of
the setting tool adapted
to the dimensions of the
fastener used
Threaded Mandrel with external
mandrel thread adapted to the
dimensions of the blind
rivet nut used, onto
which the blind rivet nut
is screwed by the setting
tool for the setting
process
Threaded Sleeve with internal
sleeve thread adapted to the
dimensions of the blind
rivet bolt used, into
which the blind rivet bolt
is screwed by the setting
tool for the setting
process
Setting head Head of the fastener
Clamping Part thickness for which
range a fastener can be used
English | 35