Description Of Masks; Starting Mask / Working Mask In Unlocked State; Starting Mask In Locked State - Honsel Rivdom eVNG 2 Instrucciones De Uso

from the threaded mandrel / threaded sleeve again
in emergency mode.

2 .10 DESCRIPTION OF MASKS

2 .10 .1 Starting mask / working mask in
unlocked state
The starting mask is displayed in unlocked state
after insertion of the battery and during the setting
of fasteners.
Battery: 80%
Force: 10A
Spindle: T
Standby: 200S
Warnings: On
File: 00
Counter: Off
Service: 300.000
Figure h Starting mask / working mask
Designation Description
Battery Displays the charge status of the
OK OK
inserted battery.
Force / Displays the set force if
Stroke force-controlled setting mode is
selected.
Displays the set stroke if
stroke-controlled setting mode is
selected.
See chapter 3.5.1
Spindle Displays T if "Trigger" spin on
mode has been selected.
Displays M if "Threaded
mandrel / threaded sleeve" spin
on mode has been selected.
See chapter 3.5.1
Standby Displays the set standby time in
seconds.
See chapter 3.5
Warnings Displays whether the acoustic
warnings are on or off.
See chapter 3.5
File Displays the number of the
loaded configuration when a
configuration has been loaded.
Displays None when no
configuration has been loaded.
See chapter 3.5
Designation Description
Counter Displays the number of set
fasteners when the counter is
switched on.
Displays Off when the counter is
switched off.
See chapter 3.5
Service Displays how many fasteners
can still be set before the
setting tool should be sent in to
HONSEL Service.

2 .10 .2 Starting mask in locked state

The starting mask is displayed in locked state after
insertion of the battery.
Rivdom eVNG Lock
Battery: 87%
Force: 10
Counter: Off
Service: 300.000
Figure i Starting mask locked
Designation Description
Battery Displays the charge status of the
OK OK
inserted battery.
Force / Displays the set force if
Stroke force-controlled setting mode is
selected.
Displays the set stroke if
stroke-controlled setting mode is
selected.
See chapter 3.5.1
Counter Displays the number of set
fasteners when the counter is
switched on.
Displays Off when the counter is
switched off.
See chapter 3.5
Service Displays how many fasteners
can still be set before the
setting tool should be sent in to
HONSEL Service.
English | 37