Ec Declaration Of Conformity; Troubleshooting; Messages On The Screen - Honsel Rivdom eVNG 2 Instrucciones De Uso

8 EC declaration of conformity

Manufacturer:
HONSEL Distribution GmbH & Co.
Friedrich-Wöhler-Str. 44
24536 Neumünster, Germany
(Legal) entity authorised to compile the technical
documentation:
HONSEL Distribution GmbH & Co.
Friedrich-Wöhler-Str. 44
24536 Neumünster, Germany
Battery-powered
setting tool
Rivdom eVNG 2
®
The manufacturer hereby declares that the named
products satisfy the requirements of the following
regulations:
EC Machinery Directive 2006/42/EC Annex I
EMC Directive 2014/30/EU
RoHS Directive 2011/65/EU
Battery Directive 2006/66/EU
If the device is modified without our knowledge and
consent, this EC Declaration of Conformity will be
voided.
Most important applied harmonised standards:
DIN EN ISO 12100:2011
IEC 62841-1: 2014 (First Edition) + C1: 2014
EN 62841-1:2015
DIN EN 55014-1:2016 + 2:2016
DIN EN 61000-4-2:2009 + 4-3:2011
DIN EN 62233:2008
IEC 62471
IEC 62133
EN 60335-1 + EN 60335-2-29
Name of the documentation officer:
HONSEL Distribution GmbH & Co.
Address of the documentation officer:
See manufacturer's address
Neumünster, 2021-07-01
_____________________________________
Tim Siepmann
(Managing Director)
Serial number
2118.B33001 –
2199.B33999

9 Troubleshooting

9 .1

MESSAGES ON THE SCREEN

Screen
RGB LED
message
None Green
None Yellow
Low Battery Red
Overload Red
Battery Red
Temp Low
Battery Red
Temp High
PCBA Temp Red
Low
PCBA Temp Red
High
Service Red
Emergency Red flashing Setting tool in
Mode
Description
Tool is ready for
operation
Tool in operation
Replace battery
Wait 10 seconds
Warm up battery
Replace battery
Warm up tool
Wait until setting
tool has cooled
down
This message
appears when the
setting tool has set
300,000 fasteners.
The message
continues to
appear until the
setting tool has
been serviced by
HONSEL Service.
emergency mode
English | 51