Overview Of Screen Menu; Change Settings - Honsel Rivdom eVNG 2 Instrucciones De Uso

3 .6 .2 Overview of screen menu

Holding the OK key pressed in the unlocked
starting mask calls up the main menu.
4 sub-menus can be selected from the main menu.
Rivdom
Function / setting
eVNG Main
• New Setup
Setup
• Adjust and Store
• Spindle Settings
− Set spindle out
− Thread
Expert
• Work Mode
• Tool Lock
• Set PIN
• Factory Settings
• Next Service
• Storage
Service
− Save setup
− Load setup
• About
• Light/Standby
− Set light time
− Set standby
• Language
General
• Counter
• Sound
− Warnings
− Keys
Figure j Overview of screen menu
Chapter
3.5.1
3.5.2
3.6.3
time
3.6.3
3.6.3
3.6.3
3.6.3
3.6.3
3.6.3
3.6.3
3.6.3
3.6.3
3.6.3
3.6.3
time
3.6.3
3.6.3
3.6.3
3.6.3

3 .6 .3 Change settings

Chapter 3.6.2 shows which
settings can be changed in which
sub-menu. Chapter 3.6.1 explains
all the possible settings.
Precondition:
• The setting tool is unlocked, see chapter 3.3.
1. Insert the battery into the setting tool.
2. Press the trigger briefly.
The unlocked starting mask / working
»
mask appears on the screen.
3. Hold the OK key pressed for 2 seconds.
The Enter PIN keypad appears on the
»
screen.
4. Enter the PIN using the arrow keys.
5. Confirm the selection with the OK key.
The Rivdom eVNG Main menu appears on
»
the screen.
6. Select the required sub-menu using the arrow
keys, see chapter 3.6.2.
7. Confirm the selection with the OK key.
The selected menu appears on the screen.
»
8. Select the desired menu item using the arrow
keys.
9. Confirm the selection with the OK key.
10. Select the desired value or setting using the
arrow keys.
11. Confirm the selection with the OK key.
12. If necessary, select Back on the screen until
the Rivdom eVNG Main menu is displayed.
13. To assign the setup to a memory cell, select
the sub-menu Service using the arrow keys.
The Service Menu appears on the screen.
»
14. Select sub-menu Storage using the arrow keys.
The Storage Menu appears on the screen.
»
15. Navigate to the number box behind Save setup
Enter No. using the arrow keys and confirm
with the OK key.
16. Select the desired memory cell using the arrow
keys.
17. Confirm the input with the OK key.
18. Navigate to Exit using the arrow keys.
19. If necessary, select Back on the screen until
the Rivdom eVNG Main menu is displayed.
20. Navigate to Exit using the arrow keys.
21. Confirm the selection with the OK key.
The unlocked starting mask / working
»
mask appears on the screen.
The setting tool is ready for operation.
»
English | 45