Check The Cooling Unit Parts And The Filling Chamber Screen; Assembling The Cooling Unit; Filling Chamber; Cleaning The Filling Chamber - STORZ & BICKEL Nighty+ Modo De Empleo

7.1.3 C heck the Cooling Unit Parts and the Filling Chamber Screen
X Check all parts for damaged surfaces, cracks, softening, hardening, em-
brittlement, contamination or discoloration.
X Discard damaged parts.
7.1.4 A ssembling the Cooling Unit
CAUTION
Plant particles in the Cooling Unit
Clogging of the Cooling Unit
Inhalation of plant particles
• Insert the Screen correctly into the Cooling Unit Cap.
X Assemble the parts in reverse order.
X Insert the small Base Seal Ring completely into the Cooling Unit Cap.
Ö The small Base Seal Ring is no longer visible.
X When assembling, make sure that Seal Rings are properly seated.
X Insert Screen in the groove provided for this purpose.
7.2 Filling Chamber
7.2.1 Cleaning the Filling Chamber
NOTICE
Material damage caused by improper cleaning
Penetration of isopropyl alcohol into the Vaporizer
• Do not moisten cotton swabs too much.
X Clean the Filling Chamber with a cotton swab soaked in isopropyl
alcohol.
7 C L E A N I N G / H Y G I E N E
59