Publicidad
Idiomas disponibles
Idiomas disponibles
Installation Guide
STEP 6: Installation of the left and right handle assembly
1. Find the left and right handles (5) and (6) (note: The handles are distinguished by "L/R" mark).
2. Remove the four hexagon socket bolts (21) and locknuts (22) that are locked in advance on the
left and right swing rods (9) and (10), and keep them aside.
3. Install the left handle (5) outside the round tube of the left swing rod (9). Then install two
hexagon socket bolts (21) through the holes of the left handle (5) and left swing rod (9). Install the
locknut (22) to secure them (Note: Pay attention to the direction of the locknut (22) (as indicated
below). The hexagon head of the locknut (22) should be aligned with the hexagon hole on the left
handle (5)).
4. Install the right handle assembly (6) on the other side in the same way (as shown in the figure
below).
Installation tool
Publicidad
