Laser Receiver; Functional Description - CST/BERGER XLP-34 Manual Original

Safety Notes
Read and observe all instructions.
SAVE
FOR FUTURE REFERENCE.
Have the measuring tool repaired only
through qualified specialists using original
spare parts. This ensures that the safety of the
measuring tool is maintained.
Do not operate the measuring tool in explo-
sive environments, such as in the presence
of flammable liquids, gases or dusts. Sparks
can be created in the measuring tool which may
ignite the dust or fumes.
Keep the measuring tool away
from cardiac pacemakers. The
magnets 20 generate a field that can
impair the function of cardiac pace-
makers.
Keep the measuring tool away from mag-
netic data medium and magnetically-sensi-
tive equipment. The effect of the magnets 20
can lead to irreversible data loss.

Functional Description

Intended Use
The measuring tool is intended for swift finding of pul-
sating laser beams.
Product Features
The numbering of the product features refers to the
illustrations on the graphics pages. (see figure H)
11 Display
12 Audio signal button
13 Button for adjustment of the measuring accuracy
14 Speaker
15 On/Off button for laser receiver
16 Direction indicator "move upward"
17 Centre mark
18 Direction indicator "move downward"
19 Reception area for the laser beam
20 Magnets
21 Battery compartment, laser receiver
22 Audio signal indicator
16 | English

Laser Receiver

THESE INSTRUCTIONS
23 Battery indicator of the laser receiver
24 Indicator for measuring accuracy
*Accessories shown or described are not part of the
standard delivery scope of the product. A complete
overview of accessories can be found in our acces-
sories program.
Technical Data
Laser Receiver
Article number
Receivable wavelength
1)
Working range
2)
Measuring Accuracy
– "Medium adjustment"
– "Coarse adjustment"
Display
Batteries
Weight according to
EPTA-Procedure 01/2003
Dimensions
Degree of protection
1) The working range can be decreased by unfavourable envi-
ronmental conditions (e.g. direct sun irradiation).
2) The accuracy is based on standard conditions with the
most common lasers. Slight varieties are possible, depending
on manufacturer, beam quality and operating conditions.
Noise Information
The A-weighted sound pressure level of the audio sig-
nal can exceed 85 dB(A).
Do not hold the measuring tool close to your
ear! Wear hearing protection!
Assembly
Inserting/Replacing the Battery
Alkali-manganese batteries are recommended for the
measuring tool.
Remove the batteries from the measuring
tool when not using it for extended periods.
When storing for extended periods, the batteries
can corrode and discharge themselves.
Replace the battery as soon as the battery indicator
23 lights up.
XLD-2
F 034 K69 BN1
635 – 650 nm
55 m
± 1.3 mm
± 2.5 mm
LCD, 2 displays
2 x 1.5 V LR6 (AA)
0.3 kg
152 x 76 x 25 mm
IP 57
2 610 A15 120 • 25.11.09