Temperature Station; Outdoor Sensor - Auriol HG02132A-US Instrucciones De Utilización Y De Seguridad

Temperature station

Note: Before mounting the temperature sta-
tion, please remove the stand
pulling it off.
Mark the location of the hole (D 0.3 in /
7.7 mm) on the wall.
Note: Use the included drilling template
intended for marking the drill holes.
Drill the hole with an electric drill.
Push the wall anchor
hole.
Using a crosshead screwdriver, screw the
screw
Hang the temperature station by placing
the hanging slot

Outdoor sensor

Mark the location of the hole (D 0.3 in /
7.7 mm) on the wall.
Note: Use the included drilling template
intended for marking the drill holes.
18 US-EN
into the wall anchor.
27
22
0.125 in/3 mm
0.125in / 0.3mm
by simply
26
into the drilled
28
on the screw.