Setting The Language / Time Zone / Time / Date Manually - Auriol HG02132A-US Instrucciones De Utilización Y De Seguridad

Drill the hole with an electric drill.
Push the wall anchor
hole.
Using a crosshead screwdriver, screw the
screw
32
Hang the outdoor sensor by placing the
hanger
Note: Never immerse the outdoor sensor in
water and protect from direct sunlight. Elec-
tronic devices may adversely affect the
wireless signal reception.
Setting the language / time
zone / time / date manually
The reception of WWVB radio signal where
the temperature station has been positioned
may become poor or interrupted. If this hap-
pens you can set the product manually.
1. Press and hold the CLOCK button
about 3 seconds.
2. Press the SET / RESET button
between 12- and 24-hour clock mode.
into the wall anchor.
on the screw.
30
0.3 in/8 mm
into the drilled
33
0.3in / 8mm
24
for
19
to switch
US-EN 19