Troubleshooting; Product Maintenance - HAMPTON BAY 585-880 Manual De Instrucciones

TROUBLESHOOTING:

Problem Possible Cause
1. Light bulb is
burned out.
2. Power is off.
Light bulb will
3. Lamp is not on a
not illuminate.
stable surface in an
upright position
4. Faulty switch.

PRODUCT MAINTENANCE:

1. To clean the interior and the exterior of the fixture, unplug the power cord
from the 120 volt outlet. Use a dry or slightly, water dampened cloth to
wipe the surfaces of the fixture.
2. Allow the fixture to dry thoroughly before plugging it back in.
3. To clean the light bulb, allow the bulb to cool and use a dry soft cloth and
wipe/dust off carefully.
CAUTION: DO NOT use any cleaners with chemicals, solvents or harsh
abrasives as damage or fading to the finish may occur.
The manufacturer warrants this lighting fixture to be free from defects in
materials and workmanship for a period of one (1) year(s) from date of
purchase. This warranty applies only to the original consumer purchaser and
only to products used in normal use and service. If this product is found to be
defective, the manufacturer's only obligation, and your exclusive remedy, is
the repair or replacement of the product at the manufacturer's discretion,
provided that the product has not been damaged through misuse, abuse,
accident, modifications, alterations, neglect or mishandling. This warranty
shall not apply to any product that is found to have been improperly installed,
set-up, or used in any way not in accordance with the instructions supplied
with the product. This warranty shall not apply to a failure of the product as a
result of an accident, misuse, abuse, negligence, alteration, or faulty
installation, or any other failure not relating to faulty material or workmanship.
This warranty shall not apply to the finish on any portion of the product, such
as surface and/or weathering, as this is considered normal wear and tear. The
manufacturer does not warrant and specially disclaims any warranty, whether
express or implied, of fitness for a particular purpose, other than the warranty
contained herein. The manufacturer specifically disclaims any liability and
shall not be liable for any consequential or incidental loss or damage,
including but not limited to any labor / expense costs involved in the
replacement or repair of said product.
Corrective Action
1. Replace light bulb.
2. Make sure power supply is on by
checking the switch and the breaker.
3. Move Lamp to a stable surface in
an upright position
4. Test or replace switch.
LIMITED WARRANTY
4