Coin Slide Guards - Alliance Laundry Systems 505048R2 Manual De Instalación Y Operación

Using serrated hex head screws from accessories bag,
install coin slide guard, to front of control cabinet. See
illustration.
A special security screw kit is available (as optional
equipment at extra cost) for securing the coin slide guard
COIN
SLIDE
GUARD
SERRATED
HEX HEAD
SCREWS
NOTE: Coin slides and coin drawers are shown for illustration only. You must obtain them locally.
505048

Coin Slide Guards . . .

(Coin Slide Models Only)
PERM PRESS DELICATE
FLUFF
NORMAL
(NO HEAT)
FABRIC SELECTOR
PUSH TO START
and front panel to front of dryer. Order Security Kit No.
298P3. A special driver, part number 56217, is available
(as optional equipment at extra cost) for installing the
special security screws.
IN USE
504210
OPERATING INSTRUCTIONS
1. Select Fabric Type (heat setting)
NORMAL, PERM PRESS,
DELICATE, FLUFF (no heat)
2. Load Clothes.
3. Insert Coin(s)/Card.
4. To Start Dryer - Close Door and Push Start.
5. To Stop Dryer During Cycle - Open Door.
6. To Restart Dryer - Close Door and Push Start.
Drying Cycle is Complete When
Panel Light Goes Off.
CLEAN LINT FILTER AFTER EACH LOAD
D382IE3B
7