Removing The Inspection Cover; The Lower Handlebar Cover - APRILIA SCARABEO50 I.E.-100 4T Manual Del Usuario

2
1
REMOVING THE LOWER
HANDLEBAR COVER
Carefully read page 47 (MAINTENANCE).
♦
Position the vehicle on the centre stand,
on a solid and level surface.
♦
Unscrew and remove the two screws (1)
shown by the arrows.
♦
Unscrew and remove the two screws (2).
CAUTION
Proceed with care to avoid damaging the
tang (4) seat (3).
♦
Using a small screwdriver, lift the tang
(4) found inside the front handlebar cover
(5).
♦
Repeat the above operation also on the
lower part of the handlebar cover.
All manuals and user guides at all-guides.com
4
1
Handle the plastic or painted components
with care and avoid scraping or damag-
ing them.
♦
Remove the front handlebar cover (5) tak-
ing care not to break the tangs.
NOTE
On reassembly, check that the tangs
are fitted properly.
5
3
CAUTION
use and maintenance Scarabeo 50
REMOVING
THE INSPECTION COVER
Carefully read page 47 (MAINTENANCE).
CAUTION
Handle the painted components with care
and avoid scraping or damaging them.
♦
Position the vehicle on the centre stand,
on a solid and level surface.
♦
Unscrew and remove the screw (6).
♦
Remove the inspection cover (7).
- Scarabeo 100 4T
7
6
65