Stryker VisionPro Manual Del Usuario página 21

Advanced Settings
Menu Item
Key Lock
Auto Source Select
Sleep Timer
OSD Control
Restore Factory Settings
Screen Control
SYNK (for the VisionPro SYNK 26" Wireless LED Display)
Status
RX APP: XX�XX�XX
RX MAC: XX�XX�XX�XX
TX APP: XX�XX�XX
TX MAC: XX�XX�XX�XX
WiFi SW: XXX-X�XX
SIGNAL = Excellent, Good, Poor
Default Region: XX
FREQ: XXXX MHz
Information
Menu Item
User Name Entry
Serial Number
Runtime
Input Format
Note: Actual on-screen display values may vary with updated versions of the firmware and
user settings.
Description
Key lock on: Disables all key functions
Press and hold the rotary knob to turn off key lock�
Scans inputs until an active video source is detected�
Auto Source Select is disabled during PIP/POP/PBP mode�
On: The display enters sleep mode if no active video source is
detected�
Off: The display will not enter sleep mode�
Timer: Set the time until the display enters sleep mode if no
active video source is detected�
Controls OSD (On Screen Display) Menu Position, Background,
and Timeout
Sets to factory default
VGA
•
•
•
•
S-Video, C-Video, •
SOG, RGBs, •
Component
Description
Enters custom user name display for boot-up display
Displays device serial number
Displays current device total run time
Displays current input format
Horizontal
Vertical
Phase
Frequency
Horizontal
Vertical
Description
Receiver
Transmitter
Transmitter
17