About Your Device - Stryker VisionPro Manual Del Usuario

About Your Device

VisionPro 26" LED Display
REF: 0240-031-020
The VisionPro 26" LED Display is a wide screen LED surgical display that can support a maximum
resolution of WUXGA (1920x1200)� The display supports the following video inputs: digital RGB,
analog RGB, serial digital interface (SDI), component video (YPbPr/RGBS), S-video, and C-video/
SOG� It also supports serial communication via the RS232 port�
VisionPro SYNK 26" Wireless LED Display
REF: 0240-031-000
The VisionPro SYNK 26" Wireless LED Display can be used with the optional SYNK Transmitter
(0240-031-010), which allows it to receive a high-definition video signal over a radio-frequency
link�
The display supports the following video inputs: DVI, S-Video, and C-Video/SOG� Once the
wireless functionality is enabled, the display supports a wireless digital RGB video input� The
display also supports a USB port and serial communication via the RS232 port�
Note: The wireless functionality of the VisionPro SYNK 26" Wireless LED Display can only be
enabled via the SYNK Transmitter.
For details and instructions on using the SYNK Wireless Transmitter and the wireless functionality
of the VisionPro SYNK 26" Wireless LED Display, refer to the SYNK Wireless System manual
(P21693)�
3