Smoke hollow DG850C Manual Del Usuario página 17

Assembly
Fig. 18A
34
B
34
B
Fig. 19A
37
A
35
A
E
E
B
40
B
Fig. 19B
A
A
38
E
E
37
18
36
Hardware needed:
Unscrew the nut and washer from heat indicator. Place
heat indicator into area in center of gas grill lid and fasten
in place with washer and nut. Repeat process for charcoal
grill lid. (Fig. 18A)
Attach lid handle and heat shield to gas grill lid using (2)
M6x15 bolts. Note: Gas grill Lid does not have hole for
smoke stack. (Fig. 18B)
Fig. 18B
Repeat process for charcoal grill lid, but without heat
shield. (Fig. 18C)
39
Fig. 18C
35
19
D
F
Hardware needed:
Insert the smoke stack through hole from inside of lid.
Attach smoke stack assembly to charcoal grill lid using (4)
M6x12 bolts and (4) M6 KEPS nuts. (Fig. 19A)
Attach smoke stack lid to smoke stack assembly using (1)
M6 cap nut and (1) Spring. (Fig. 19B)
35
Gas and Charcoal
Lid Assembly
B
x4
Charcoal Grill Smoke
Stack Assembly
A E
x4, x4,
D F
x1, x1
17