TallyGenicom 3860 Guía De Referencia Rápida página 19

Find the ribbon drive spindle.
Ribbon Drive Spindle
Seat the cartridge on the ribbon drive spindle.
Snap the ribbon cartridge down on the supports.
Turn the ribbon advance knob clockwise to make sure the ribbon is taut.
Ribbon
Advance
Knob
Adjusting the Ribbon Advance Knob
18
All manuals and user guides at all-guides.com
Look down into the printer toward the left side and notice a small shaft
sticking up vertically through a shiny plate.
Hub
Place the cartridge down in the printer about where it should go and slide
it around until the ribbon drive spindle slips up into the hub of the
cartridge. Turn the ribbon advance knob clockwise and feel the ribbon
drive gears turning in the printer.
There are feet on the bottom of the cartridge at the front corners. These
snap onto corresponding feet in the printer. Gently push the front corners
of the cartridge down at both ends until the snaps snap into place.
Support
Rear of Cartridge
Foot
GEK-01054