Maintenance; Removing The Printer Ribbon - TallyGenicom 3860 Guía De Referencia Rápida

Maintenance

Removing the Printer Ribbon

If there is paper under the print head -
Remove the top door.
If the printer has been printing for a while, the print head may be
HOT!
32
All manuals and user guides at all-guides.com
The print head has to back away from the striker bar to provide
clearance for the removal of the printer ribbon.
On dual path printers, the print head automatically backs away from the
striker bar any time the printer is turned on and there is no paper under
the print head. On single path printers, you will need to manually open
the print gap.
Press the PARK/PATH key. The printer should retract the paper, and the
Fault:Paper Out
LCD should say
Top Door Removal
To remove the ribbon, grasp the ribbon cartridge and gently but firmly
pull up until the cartridge releases and the ribbon cartridge can be lifted
out of the printer. Carefully remove the ribbon guide from the print head.
To install a new ribbon, follow the instructions beginning on page 16 of
this guide.
.
WARNING:
GEK-01054