Paper Handling; Paper Handling Configuration - TallyGenicom 3860 Guía De Referencia Rápida

Paper Handling

Paper Handling Configuration

Fully Attended
Semi-Attended
3860/80 Quick Reference Guide
All manuals and user guides at all-guides.com
Moves paper down by 1/72 inch per click. Do not move
paper down so far as to allow printing on the striker bar.
Instead of using the UP ARROW key to adjust the same amount of offset
each time a particular form is loaded, that offset can be stored in a
parameter called top print reference and saved to a Format. If a top print
reference is saved, paper will advance to the right place each time that
paper path is loaded. See "Set a Top Print Reference", in Chapter 8 of
the 3860/80 User's Manual.
Use the bottom paper path for thick, or heavy, hard-to-feed forms or for
printing labels. Use the rear path for forms that are easiest to feed.
Pedestals, racks, and baskets shown below are available from the printer
representative or supplier, or check GENICOM's website:
www.genicom.com.
Tear Off
Every One
or Two
Sheets
Paper
Rack
Paper
Basket
Paper Handling Configurations
Unattended
Paper
Rack
Tear Off
Every
One or
Two
Sheets
Paper
Shelf
Pedestal
27