Setting Up The Printer; Selecting A Good Location; Unpacking The Printer - TallyGenicom 3860 Guía De Referencia Rápida

Setting Up the Printer

Selecting a Good Location

level and solid
away from direct sunlight, away from heaters and heating vents
away from excessive dust or moisture
within 6 feet (1.8 meters) of a grounded AC outlet
suitable for using the bottom paper path

Unpacking the Printer

8
All manuals and user guides at all-guides.com
Choose a printer location that is:
Print head speeds are very high. If the printer table is not extremely
stable, the printer may cause the printer table to rock.
Ribbon inks dry out in the sun. High temperatures degrade plastic and
stress electrical components
Dust shortens print head and gear train life. Very high humidity causes
paper handling problems.
The length of the power cord is approximately 6.5 feet (2 meters).
The printer stand must have a slot through which to feed paper. A
suitable pedestal is available from GENICOM. The bottom paper path is
the best choice for labels, bar code labels, multi-part forms, card stock
and other hard-to-feed stock.
Packaged with the printer is an Unpacking/Re-packing Instruction Sheet,
this Quick Reference Guide, a Compact Disk containing the User's
Manual and the Programmer's Manual, a power cord, a ribbon cartridge,
two paper guides, and a tractor assembly.
Follow the information on the Unpacking Instruction Sheet.
GEK-01054