Drip Tray; Ice-Maker - Grundig GSBS23340FXPN Manual Del Usuario

Using the product

6.15 Drip tray

(optional)
The water dripping from the water
fountain accumulates on the drip tray;
no water drainage is available. Pull
the drip tray out or push on the edges
to remove the tray. You may then
discharge the water inside the drip tray.

6.16 Ice-maker

(Optional)
Ice maker is located on the upper
section of the freezer cover.
Hold the handles on the sides of the
ice stock reservoir and move up to
remove.
Remove the ice-maker decorative lid
by moving up.
OPERATION
To remove the ice reservoir
Hold the ice stock reservoir from the
handles, then move up and pull the
ice stock reservoir.
To reinstall the ice reservoir
Hold the ice stock reservoir from the
handles, move up with an angle to fit
the sides of the reservoir to their slot
32
and make sure that the ice selector
pin is mounted properly. (Figure 2)
Push downwards firmly, until there is
no space left between the reservoir
and the door plastic. (Figure 2)
If you have difficulty in refitting the
reservoir, turn the rotary gear 90° and
reinstall it as shown in the figure3.
Any sound you hear when the ice
drops into the reservoir is a part of
normal operation.
When the ice dispenser does not
work properly
If you do not remove ice cubes for a
long time, they will cause formation
of ice chunks. In this case, please
remove the ice stock reservoir in
accordance with the instructions
given above, seperate the ice chunks,
discard the inseparable ice and put
the ice cubes back into the ice stock
reservoir. (Figure 4)
Refrigerator / User Guide
32 /44 EN