Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación página 24

l When the machine has set the timer mode, click on the blue circle to enter the 'Setting' mode. You can view the detailed
setting, as shown in the picture below:
m The timing task of the current partition can be quickly switched through the switch button. Click one to switch the state.
When set to " " the timer action does not perform in the current partition, however the current button is not affected
by the" effective/invalid " function of the timer task.
n When the number of faults is not '0', click on the red circle to quickly check the fault details of the current partition, as
shown in the figure below:
20