3.5 Fault Device Configuration
Equipment fault monitoring is divided into two parts: real-time fault alarm and history alarm. Real-time fault alarm is used
mainly to check the current equipment fault, whereas the history alarm is used for checking the faults that have previously
occurred in the equipment. This is to facilitate follow-up maintenance and troubleshooting.
3.5.1 Current Fault
j Check icon: Click on the "Current fault/History Fault/Current Pre-Alarm/History Pre-Alarm" switch to enter the alarm
interface.
k To check the gateway alarm, select 'Totalgateways'. Once you choose 'All gateways', it will display the list of all the
'current alarm'. You can also check the gateway address failure. As it only displays the failure gateway, it's a convenient
troubleshooting system fault.
26