Unit Setting - Carrier 40VCC727FQEE Manual Del Propietario Y De Instalación

3.11 Unit Setting

The unit setting function is used for managing the external machine system and check the state parameters of the external
machine (master and slave).
The unit setting function is mainly used for managing the external machine. It can check the external machine state quickly,
lock the external machine mode and set the system load rate limit.
j External machine management displays the gateway information and gateway name. Click " " to edit the name of
the unit.
k Displays the current version of the gateway.
l System mode setting: The system mode can be set as "single cold/single hot/unlimited".
In single cooling, the system only responds to the cooling demand of the internal machine. Different modes are displayed
when the internal machine sends out the heating mode.
In single heat, the system only responds to the heating demand of the internal machine. Different modes are displayed
when the internal machine sends out the refrigeration mode.
In Unlimited, the system responds to the internal machine's refrigeration or heating requirements. The system mode is
based on the first internal machine turned on in the current system. The system load rate limit can limit the system operation
of the maximum load rate thus setting the limit value for the system.
45