Image Capture; Menu - RIDGID Micro CA-300 Manual Del Usuario

micro CA-300 Inspection Camera
Figure 15 - Adjusting LED
Zoom: The micro CA-300 Inspection Camer a
has a 3.5x digital zoom. Simply press the up
and down arrows
to zoom in or out. A zoom indicator bar will
be displayed on the screen as you adjust
your zoom.
Figure 16 - Adjusting Zoom
Image Rotation: If needed, the image/video
seen on the screen can be rotated in 90 de-
gree increments counter clockwise by press-
ing the rotate image button

Image Capture

Capturing a Still Image
While in the live screen, make sure the still
camera icon is present at the top left
portion of the screen. Press the shutter but-
ton to capture the image. The save icon
will momentarily appear on the screen. This
indicates the still image has been saved to
the internal memory or SD™ card.
Capturing a Video
While in the live screen, make sure the video
camera icon is present at the top left
portion of the screen. Press the shutter but-
ton to start capturing video. When the device
is recording a video, a red outline will flash
around the video mode icon and the re-
12
while in the live screen
.
cording duration will show at the top of the
screen. Press the shutter button again to stop
the video. It may take several seconds to save
the video if saving to the internal memory.
The micro CA-300 features an integrated micro-
phone and speaker for recording and playback
of audio with video. A headset with integrated
microphone is included and may be used instead
of the integrated speaker and microphone. Plug
the headset into the audio port on the right side
of the camera.
5. When the inspection is complete, care-
fully withdraw the camera and cable
from the inspection area.
Figure 17 - Video Recording Screen

Menu

Pressing the menu button
will access the menu. The menu will overlay
on the LIVE Screen. From the menu, the user
will be able to change to the various modes
or enter the settings menu.
There are different setting categories to
choose from (Figure 18) while in the settings
screen. Use the right and left arrow buttons
to switch from one category to the next.
Use the up and down arrows
gate the menu items. The selected category
will be highlighted with a bright red outline.
Once the desired setting is reached, press
select to change to the new selection. The
changes are automatically saved when they
are changed.
While in menu mode, you can press the re-
turn button to return to the previous
screen or hit the menu button
the menu and return to the live screen.
at any time
to navi-
to exit