Phoenix Mecano RK Rose+Krieger LZ 80 Instrucciones De Montaje página 39

Sources for the harmonised standards according to Article 7, Paragraph 2
EN ISO 12-100:2010-11:
EN 61000-3-3:2008:
EN 55014-2:1997/A2:2008
EN 61000-3-2:2006/A2:2009 Electromagnetic compatibility (EMC) – Part 3-2: Limits - Limits for
EN 55014-1:2006-12
The manufacturer or the person authorised are obliged to hand over the special documents for
the partially completed machine to the national authorities on reasoned request. This transfer is
carried out in electronic format.
The commercial protective rights remain unaffected by this.
Important note! The partially completed machine must only be put into operation once, if re-
quired, it has been determined that the machine in which the partially completed machine is to be
installed complies with the regulations of this guideline.
Minden / 29.07.2014
Place / Date
Minden / 29.07.2014
Place / Date
Safety of machinery – General principles for design – Risk assessment and
risk reduction.
Electromagnetic compatibility (EMC) - Part 3-3: Limits - Limitation of
voltage changes, voltage fluctuations and flicker in public low-voltage
supply systems, for equipment with rated current <= 16 A per phase and
not subject to conditional connection (IEC61000-3-3_2008).
Electromagnetic compatibility - Requirements for household appliances,
electric tools and similar apparatus - Part 2: Immunity - Product family
standard
harmonic current emissions (equipment input current < = 16 A per phase
Electromagnetic compatibility - Requirements for household appliances,
electric tools and similar apparatus - Part 1: Emission
Signature
Signature
Technical Manager
Signatory information
Managing Director
Signatory information
1. Installation
39