Panasonic AG-YAGHG Instrucciones De Funcionamiento página 10

ENGLISH
Additional Menus
Motion Picture
Interface Unit
SDI Remote
Recording
LED Brightness
3G-SDI Type
Low Battery Alert
Setup
Version Disp.
In addition, some settings in the following menu items will be restricted when the unit is mounted
on the digital camera.
Setup
TV Connection
yHDMI Mode (Play):
y
• When [AUTO] is selected, the output
resolution is set automatically based on the
recorded format (resolution).
• When a setting other than [AUTO] is
selected, timecodes are not superimposed
on SDI outputs.
y3D Playback:
y
Fixed at [2D].
yVIERA Link:
y
Fixed at [OFF].
E-9
(continued)
Settings for the interface unit
Select whether to output control information for recording start/stop to
the external equipment connected to this unit's SDI OUT terminals.
y[ON]: Enable the function.
y
y[OFF]: Disable the function.
y
Specify the brightness of the level meters.
y[HIGH], [LOW]
y
Select the type of signal that will be used when outputting 3G-SDI
signals.
y[LEVEL A], [LEVEL B]
y
Select the voltage at which to display the low battery (voltage decline)
warning for the DC power battery.
y[11V], [12.5V], [13.5V], [15V]
y
indicator will turn red and blink before the battery charge is
The
empty.
Replace the battery when the battery charge is low and "Interface
Unit: Low Battery Alert" is displayed.
Display the firmware version of the unit that is added.
Motion Picture
HDMI Rec Output
y4K Down Convert:
y
[AUTO] cannot be selected.