Switching The Video Output; Additional Menus - Panasonic AG-YAGHG Instrucciones De Funcionamiento

Switching the Video Output

When you mount the unit on a digital camera and set the camera to playback mode, videos and
menus will not be displayed in the camera's monitor.
Press the [Fn3] button in such cases to switch the video output destination to the digital camera
and display videos and menus in the camera's monitor.
Press the [Fn3] button again to switch the video output destination to the unit.

Additional Menus

When the unit is mounted on the digital camera, an additional menu will appear in the digital
camera's display.
Be sure to read the digital camera's operating instructions together with this document.
yMenu settings are registered to the digital camera when you turn it off.
y
Motion Picture
Interface Unit
Audio Input Select
Settings for the interface unit
Select the audio to input to the digital camera.
y[BODY]: y
Input audio from the digital camera's internal microphone or from the
external microphone connected to the digital camera.
y[XLR]: y
Input audio from the equipment connected to this unit's AUDIO IN
[CH1, CH2] terminals.
When this is selected, the [Lens Noise Cut] setting will be fixed at
[OFF].
ENGLISH
[Fn3]
(Continued on the next page)
E-8