Ghibli & Wirbel S2 Uso Y Mantenimiento página 57

www.ghibliwirbel.com
Professional Cleaning Machines Since 1968
5) Water solenoid valve switch
This switch can be enabled by turning the
key (2) to its "1" position and the switch
(4) to its "I" position.
The button (5) turns on when pushed,
presetting the opening of the water so-
lenoid valve, which is controlled by the
levers (8).
Use the tap (6) to adjust the quantity of
water.
6) Water quantity adjustment tap
- Turn the tap (6) counter-clockwise to
increase the quantity of water or turn it
clockwise to decrease it.
7) Traction and brush rotation starting
levers
Operating the levers (8) when the key (2)
is in the "1" position and the switch (4) in
the "I" position, the traction is started, as
well as the rotation of the brushes and the
water flow.
Press the levers in direction "A" to acti-
vate forward movement;
press the levers in direction "B" to acti-
vate reverse movement.
N.B.:
The speed of the movement is proportional
to the angle at which the levers are pressed.
9) Maximum speed adjustment handle
Turn the handle to the left to decrease the
maximum speed and turn it to the right to
increase it.
ENGLISH - 15