Quick Setup Guide TDL GPro 500
2 Before the installation
Flange placement
Flange requirements
60 cm (23.6")
The TDL head should be easily accessible. A person should be able to stand in
front of it and adjust the M16 fixing bolts using two standard spanners. There
should be at least 60 cm free space measured from the flange fixed to the stack
and outwards as shown below.
min. clearance: 61.5 mm
(schedule 40)
DIN 50 or ANSI 2"
(Example: Probe with DN50 / ANSI 2" flange with 126.5 mm wall thickness.)
126.5 mm
(5")
min. clearance: 77.5 mm
(schedule 80)
DIN 65 or ANSI 2½"
25