Flow Conditions At Measuring Point - Mettler Toledo GPro 500 Guía De Instalación Rápida

Quick Setup Guide TDL GPro 500
Flow conditions at
measuring point
26
DN50/PN25
ANSI 2"/300 lbs
When deciding the placement of the GPro 500 TDL in the process, we recom-
mend a minimum of 5 stack diameters of straight duct before and 3 stack di-
ameters of straight duct after the point of measure.
This will lead to laminar flow conditions which is favorable for stable measure-
ment conditions.
DIN
DN100
100 mm 100 mm
ANSI
4"
4"
DN65/PN25
ANSI 2.5"/300 lbs
4"