Publicidad
Idiomas disponibles
Idiomas disponibles
d. Stove connection to main
• Make sure that the mains voltage corresponds to the voltage indicated on the rating plate of the ap-
pliance (Fig. 17 Pos. 1)
• To connect the appliance to the mains, connect the power cord to the terminal box at the bottom of the
appliance (Fig. 17 Pos. 3). The power cord with a plug is NOT part of the kit and must be purchased.
• The device must be connected to an equipotential equalization system using the equipotential screw
(Fig. 17 Pos. 4) underneath the device next to the junction box. It is marked with the following symbol:
The power cord should be flexible, oil-resistant, earthed, polychloroprene-coated - it can be made by the
manufacturer and available from him or in specialist repair shops
Figure 19. Example of the nameplate
PE – protective wire (yellow-green)
N – neutral wire (blue)
L1, L2, L3 – phase wires (other colors)
Figure 20. onnecting the unit to the mains
- 58 -
1. Model
2. Catalogue code
3. Serial number - year of ma-
nufacture
4. Degree of protection
5. Net weight
Electrical part
6. Voltage
7. Frequency
8. Electrical power
The gas part
9. Country
10. Category
11. Supply pressure
12. Type
13. Nominal heat load
14. Gas consumption depending
on the type of supply gas
15. Gas/pressure adapted device
Publicidad
