This instruction manual forms an integral part of the automatic ice flaker (subsequently referred
to as appliance), and should be kept for future consultation.
In the event of the appliance being sold or transferred to another person, this Manual must be handed
over to the new user, in order to enable him to become familiar with the operation of the equipment and
the corresponding advice and recommendations.
‼
Before installing and using the appliance, read the advice and recommendations contained
in this instruction manual very carefully. They are given in order to ensure safe installation, use
and maintenance of the appliance.
always remove the plug from the power socket before proceeding with any cleaning or maintenance
•
operations
to ensure the appliance operates efficiently and correctly, it is essential to comply with the
•
Manufacturer's instructions and to make sure that maintenance is performed by specially qualified
personnel
always lift the appliance to move it, even slightly. Do not push or pull it
•
any use of the appliance other than the ice production using cold drinking water will be deemed
•
improper
in the event of a defect and/or malfunction of the appliance, switch off with the switch fitted at the
•
installation stage, unplug the appliance and turn off the water supply tap. Do not make any attempt
to repair or modify the appliance; only contact one of the Authorized Service Centers
in addition to rendering any form of warranty null and void, modifying (or attempting to modify) this
•
appliance is extremely dangerous
any specific information or diagrams regarding particular models will be attached to this Instruction
•
Manual
‼
Use of this electrical appliance requires compliance with certain fundamental rules; in particular:
• do not touch the appliance with wet or damp hands or feet
• do not use the appliance when you are barefoot
• do not use extensions in premises such as bathrooms or shower rooms
• do not tug on the power supply cable to disconnect it from the mains
• do not allow the appliance to be used by children or by incapable persons
• supervise children to ensure that they do not play with the appliance
• do not insert anything between the moving parts and the guards
Should you decide to scrap appliance, first disconnect the power cable from the mains, and then cut the
cable off.
In addition, proceed as follows:
• break off and remove the door in order to prevent the possible danger of a child getting trapped inside
• do not allow the coolant gas and oil in the compressor to disperse into the environment
• dispose of or recover the various materials according to the terms of the local regulations in force in
your State
This appliance does not contain coolant that damages the ozone layer.
‼
The Manufacturer shall not be liable for any damage to the environment, animals, persons
or objects caused by incorrect installation.
The voltage and frequency are given on the data plate on the appliance. Refer to this data plate to
check compliance.
Voltage (1), power (2), model (3), serial No. (4), Manufacturer (5).
1 IMPORTANT ADVICE AND RECOMMENDATIONS
2 TECHNICAL DATA (Fig. 1)