Verathon GlideScope Go Instalación Y Manual De Funcionamiento Y Mantenimiento página 24

All manuals and user guides at all-guides.com
Product
STERIS S40™
®
or S20™
STERIS V‑PRO
® ®
low temperature
sterilization
systems
ASP Hydrogen
®
Peroxide Gas
Plasma
1. Ensure the equipment is clean according to the previous steps.
2. Prepare and condition the disinfection solution according to the solution
manufacturer's instructions and the conditions stated in
3. Disinfect the video baton according to the conditions stated in
exposure process and times vary depending on the solution and the component.
Note: If you are using a wipe method, rewipe the component as needed in order to
ensure that it remains visibly wet for the duration of the exposure period. You may
use multiple wipes as necessary.
4. If applicable, rinse the video baton according to the solution manufacturer's
instructions.
5. Dry the video baton by using a sterile cloth, hospital‑grade clean air, or a
low‑temperature dryer.
Note: If you are using a wipe method, allow the component to thoroughly air dry.
6. Inspect the video baton according to the instructions in the following procedure,
and then store the disinfected video baton in a clean environment.
PROCEDURE 5. CLEAN THE CHARGING CRADLE
Clean the charging cradle when it is visibly soiled and on a regular basis, as per a schedule
established by the medical care facility or provider.
CAUTION
1. Ensure the monitor is not in the charging cradle, and then unplug the device.
2. Using a solution from
until all visible contamination has been removed.
18
Disinfection
Level
Standard cycles in the following processors:
STERIS
Sterilization SYSTEM 1E
SYSTEM 1 EXPRESS (outside U.S.)
SYSTEM 1 PLUS (outside U.S.)
Sterilization Up to 200 cycles as per manufacturer's instructions
STERRAD
STERRAD
Sterilization
STERRAD
STERRAD
Do not submerge the charging cradle in a liquid solution.
Compatibility & Availability
Conditions
SYSTEM 1 (outside U.S.)
® ®
(in U.S.)
®
100S (in U.S.),
®
® 100S short cycle (outside U.S.),
NX standard cycle, or
®
100NX standard cycle
®
on page 14, wipe the exterior
Table 7.
Table 7. The