1. SAFETY INSTRUCTIONS
Important!
•
Please read the user manual carefully before installing or using this product.
•
If you are installing this product for a third party, please remember to leave the manual or a copy of it with the
end user.
Warning:
•
The various components may only be dismantled by an authorised technician.
Safety precautions:
•
To ensure the safe operation of the system, installers, users and technicians must follow all the safety procedures
described in this manual.
•
Specific warnings and warning symbols are marked on the components where necessary.
•
Implementation must be carried out according to the standards in force in the country in which the product is
installed (NF15-100 for France).
2. DESCRIPTION
1 •
Monitor
2 •
Wall bracket
General information
This videophone consists of an indoor answering unit with a screen and an outdoor panel with an intercom and
camera allowing you to see and communicate with the visitor who has pressed the bell. It is easy to install as only
2 wires are needed for all functions: bell, video image, intercom and strike plate and automatic opener controls. To
get the most out of your intercom, please read this instruction manual carefully.
3. NOMENCLATURE
a. Monitor
(fig. 2)
1. 7" (18 cm) colour screen.
2. Slot for SD Card (32 GB max), not included.
3. Melody selection (6 bell sounds available).
4. Light settings
5. Volume settings for sounds coming from outside.
6. Volume settings for the bell sound.
7. Refreshing the picture on the monitor (surveillance mode) // Navigating the left-hand menu
additional camera or additional intercom panel.
8. Monitor turned on, communication with the intercom unit. This only needs to be pressed once to activate the
connection with the intercom panel. Pressing a second time will break the connection and the picture on the inter-
com panel will disappear // Navigating the right-hand menu
9. Automatic opener control (only available if the screen is turned on)// Exiting a menu
10. Strike plate/lock control (control with power connected, one-touch) (available only if the screen is on) // Con-
firming via the menu
11. Entering the menu// exiting the menu // taking a photo (screen on)
12. Microphone for communicating with the intercom panel.
13. Orange indicator light: power on. Off: monitor powered off or in protection mode. Flashing: message waiting
to be read.
14. Sockets for the adaptor's two 17 V plugs
NFC 15-100 for France). Be sure to respect the polarity (labels + and -).
15. Terminal blocks for connecting the wires coming from the intercom panel.
b. Intercom panel, additional intercom panel (PL VISIO +)
1. Infra-red LED for better visibility in the dark (light invisible to the naked eye).
2. Adjustable C-MOS camera lens (at the back of the camera).
3. Loudspeaker: allows you to be heard outside.
GB2
(fig. 1)
3 •
Plug-in adaptor
4 •
Intercom panel
(adaptor connected in accordance with current installation standards:
CFI EXTEL NOVA / NOVA WHITE / ICE - 11/2016
5 •
Rain-proof shield
(fig. 3)
// Viewing the