Kyocera mita HS-8E Guía De Instrucciones página 10

All manuals and user guides at all-guides.com
To select the stacker for face-up delivery of printed pages, press
3.
the MENU key, then press the
printer's message display shows Paper Handline >.
Paper Handling >
Press the
4.
printer's message display shows > Stack Select.
>Stack Select
Press the ENTER key. When the ? mark begins flashing, press
5.
the or key to display Option Stacker, then press the
ENTER key.
>Stack Select
? Option Stacker
Make sure that the printer is on-line, then begin printing.
6.
During printing, the paper tray in the stacker automatically
lowers as it receives printed pages.
The printer does not stop printing when the stacker
tray becomes full. If printing is continued, paper will
fall out of the tray or jam inside the stacker.
Therefore, when the tray becomes full, set the
printer off line and remove the paper as described
below, then set the printer back on line to resume
printing.
8
HS8-Eng.p65
or
key, then press the or
8
key repeatedly until the
key repeatedly until the
8/8/01, 11:28 AM