Kyocera mita HS-8E Guía De Instrucciones página 8

All manuals and user guides at all-guides.com
Mount the sub tray to the main tray as shown below.
4.
This unit is provided with two sub trays, one large
and one small. Ordinarily, you should use the small
sub tray. However, in case printouts fall out of the
tray, you can replace the small sub tray with the
larger one.
Adjust the left and right paper guides according to the paper size
5.
of the paper on the tray. Note that the paper guides are best
adjusted when there is an approximately 5-mm gap on each side
of the paper delivered to the adjuster.
This completes setting up the paper stacker. Before using the stacker,
make sure that the top cover is closed. Then, plug the printer to power.
6
HS8-Eng.p65
Paper
6
Sub Tray
Paper Guides
8/8/01, 11:27 AM