Kyocera mita HS-8E Guía De Instrucciones página 12

All manuals and user guides at all-guides.com
Pull the paper feed unit release lever up and draw the paper feed
2.
unit half the way out.
Clear the jammed paper from the stacker.
3.
Top Cover
Jammed Paper
If paper is not found inside the cover, check paper jam inside the
printer.
After removing the jammed paper, close the stacker top cover
4.
properly, using the reverse manner of step 1. Then, close the
printer's paper feed unit until it latches in. Wait until the
printer's message display indicates Ready. Then the printer
automatically goes on-line and continues printing. Depending on
the place at which the jam occurred, the printer may or may not
reprint the jammed page.
If the paper stacker's cover is not closed properly,
the message Option stacker cover Open appears
on the printer's message display. Make sure that the
covers are properly closed.
10
HS8-Eng.p65 10
Paper Feed Unit
Release Lever
8/8/01, 11:28 AM