Removing The Steering Column Cover; Installing The Steering Column Cover; Fuses - Viking MR 4082 Manual De Instrucciones

Ocultar thumbs Ver también para MR 4082:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 297
Fuel cock (1) is opened and closed via
control valve (2).
14.17 Removing the steering column
cover
● Stop the engine. (
12.3)
● Engage the parking brake. (
● Remove the ignition key and keep it in a
safe place.
104
Press both retaining lugs (1) inwards
slightly and hold. Pull steering column
cover (2) downwards and remove.
14.18 Installing the steering column
cover
● Stop the engine. (
● Engage the parking brake. (
● Remove the ignition key and keep it in a
safe place.
8.10)
Insert steering column cover (1) upwards
into dashboard (2) from below.
Guide retaining lugs (3) into openings (4).
Allow steering column cover (1) to engage
by pressing slightly.

14.19 Fuses

12.3)
8.10)
● Stop the engine. (
● Engage the parking brake. (
● Remove the ignition key and keep it in a
Fire hazard!
Never bypass the fuses with wire or
foil.
Never use a fuse with a value that
differs from the specified rating
(ampere).
If a new fuse blows within a short
time, an electrical fault (e.g. short
circuit) is the probable cause.
A specialist dealer should be
consulted. VIKING recommends
VIKING specialist dealers.
12.3)
safe place.
0478 193 9902 A - EN
8.10)

Publicidad

Tabla de contenido
loading

Tabla de contenido