Turbo Brush - Eureka 430 Serie Guia Del Propietario

●
S
●
Y
FIG. 8
●
H
FIG. 10
● ●
U T
●
10
FIG. 12
All manuals and user guides at all-guides.com
●
F
●
F
V
ENGLISH
HOW TO USE
CAUTION: Make sure on/off switch is in the off (O) position before
connecting turbo brush.

Turbo Brush

This convenient air driven turbo nozzle is perfect for pet hair, upholstery,
stairs and area rugs.
To use, remove from storage position in dust cup lid and attach to end of
hose. Riser Visor
chair/sofa backs and stair risers. Riser Visor
horizontal surfaces like upholstered chair/sofa seats and stair treads.
Turbo Brush Maintenance
Step 1: To open turbo nozzle
side (FIG. 8).
Step 2: Lift up the bottom housing (FIG. 9).
Step 3: Clear blockage from brushroll area.
FIG. 9
Step 4: To close align top and bottom housing and tighten with the two
(2) screws.
HOW TO MAINTAIN
The instructions in this booklet serve as a guide to routine maintenance.
To keep the cleaner operating at top efficiency empty the dust cup and
clean the filter after each use. To maximize cleaner efficiency do not
allow the dust cup to be filled past the bottom of the filter.
Empty Dust Cup
CAUTION: Turn off the power switch and unplug the electrical cord
to service.
Step 1: Push dust cup release button
Step 2: Pull the dust cup
Step 3: Rotate the dust cup lid
cup filter
Step 4: Empty the dust cup
filter refer to dust cup filter section.)
Step 5: Put the lid
FIG. 11 bottom is centered in the inner tube and the lid is aligned
correctly on the cup. Rotate the dust cup lid clockwise until it
locks.
Step 6: Place the bottom of the dust cup
the top of the dust cup back into place until it locks.
Remove a Clog in the Base
This model has a clean-out port
of the power nozzle
lodged in the airway (See FIG.3).
CAUTION: Turn off the power switch and unplug the electrical cord
to service.
Step 1: On the bottom of the power nozzle
Clean-Out Port Door
Step 2: Remove the port door
the nozzle
needed for this step.
FIG. 13
(CONTINUED)
(continued)
(some models only)
® flips up to clean vertical surfaces like upholstered
® flips down to clean
●
S
, unscrew the two (2) screws
●
H (FIG. 10).
●
F
away from the main housing (FIG. 11).
●
U
counterclockwise to remove. The dust
●
V comes out with the dust cup lid (FIG. 12).
●
F
into a waste container (FIG. 13). (To clean
●
U
back on dust cup. Be sure the gasket on the filter
●
F
in the main housing. Push
●
Q
which allows access into the bottom
●
G
in order to remove large debris that has become
●
G
, locate the transparent
●
Q
located between the wheels (See FIG. 3).
●
Q
by squeezing the latch at the back of
●
G
and rotating the port door forward. No tools are
●
Y
on the