Daily Maintenance - Citizen CT-E601 Manual De Usuario

n Be sure to firmly insert the cable plugs into their mating sockets.
l A cross connection may damage the printer's internal electronics or the host
system's hardware.
n Only use the printer with devices that have designated solenoid specifi-
cations for the cash drawer interface connector.
l Neglecting this caution may result in malfunction or failure.
To prevent injury and printer failures from worsening, observe the follow-
ing:
l Do not touch the printing surface of the thermal head.
l Do not touch any of the moving parts (e.g., paper cutter, gears, active electric
parts) while the printer is working.
l In case of trouble do not attempt to repair the printer. Ask Citizen Systems serv-
ice for repair.
l Be careful that the covers do not pinch your hands or fingers.
l Be careful of the sharp edges on the printer. Do not allow them to injure you or
damage property.
u May result in electric shock, burn, or injury.
If the printer emits smoke, an odd smell, or unusual noise while
printing, immediately abort the current print session and
unplug the printer from the electric outlet.
Observe the following precautions for daily maintenance.
l When cleaning the printer, always turn it off and unplug it from the electric outlet.
l Using a soft and dry cloth, wipe off any dirt or dust on the surface of the case.
If it is badly soiled, wipe it off with a dish towel wetted with water and wrung out
hard.
Never use organic solvents such as thinner, trichloroethylene, benzene, ketone,
etc., or chemically treated cloth.
l To remove paper dust, use a soft brush.
CAUTION

DAILY MAINTENANCE

– 15 –