Ups Circuit Block Diagram - Tripp-Lite SmartOnline SU5KRT3UHVMB Manual Del Propietário

Important Safety Instructions
• Do not short or bridge the battery terminals with any object.
• Remove battery grounds during installation and maintenance to reduce likelihood of shock.
• Remove the connection from ground if any part of the battery is determined to be grounded.
External Battery Warnings
• Connect external battery ground wire before connecting external battery to UPS.
• For external battery configuration, see the Operations section for options and configuration method. Smart battery packs are
automatically detected by the UPS.
• Fuses should be replaced only by factory authorized personnel. Replacement fuses should be of the same rating and type.
• For extended runtime, only use compatible Tripp Lite battery modules:
• BP192V12RT3US External Battery Pack
Battery Replacement and Recycling
Tripp Lite products use sealed lead-acid batteries, which are highly recyclable. Refer to your local codes for disposal requirements,
Call Tripp Lite at +1.773.869.1234 or visit tripplite.com/support/recycling-program for more information on recycling the batteries
or any other Tripp Lite product.
Tripp Lite offers a complete line of UPS System Replacement Battery Cartridges (R.B.C.).Visit Tripp Lite on the Web at
tripplite.com/products/battery-finder/ to locate the specific replacement battery for your UPS.
Maintenance Warnings
• Your UPS does not contain user-serviceable parts. Do not disassemble.

UPS Circuit Block Diagram

L1
EMI
L2/N
Bypass
Rectifier
& Booster
Relay
Battery
BUS Inverter
Charger
6
Relay
EMI
L1
L2/N