Before First Use; Using The Appliance; Activating The Appliance And Setting Aprogramme - AEG L98690FL Manual De Instrucciones

18

BEFORE FIRST USE

1. To activate the drain system, put 2
litre of water in the main wash com-
partment of the detergent dispens-
er.
2. Put a small quantity of detergent in
the main wash compartment of the
detergent dispenser. Set and start
a programme for cotton at the
highest temperature without laun-
dry. This removes all possible dirt
from the drum and the tub.
LANGUAGE SETTING
The first time you activate the appli-
ance, the display shows the default lan-
guage and tells you to confirm it or
change it:
• Turn the programme knob to set the
desired language.
• When the display shows the necessa-
ry language, touch button
firm the selection.
Change the language after the
first activation
1. Touch button
the same time for some seconds.
2. When display shows the language
set, turn the programme knob to
set the new language.
3. Touch button
lection.

USING THE APPLIANCE

1. Open the water tap.
ACTIVATING THE APPLIANCE AND SETTING A PROGRAMME
For a correct operation of the weight sensor, activate the appliance and
set the programme BEFORE you put the laundry in the drum.
1. Press button
pliance.
2. Turn the programme knob (
the necessary programme or touch
one of the buttons
All manuals and user guides at all-guides.com
to con-
6
11 and button 10
6 to confirm the se-
1 to activate the ap-
) to
2
5 to set a
CLOCK SETTING
After you set the language, the display
tells to set the clock:
• The hour digits flash.
• Turn the programme knob to change
the hour.
• Touch button
lection.
• The minute digits flash.
• Turn the programme knob to change
the minutes.
• Touch button
lection.
Change the time of the day
after the first activation
1. Touch button
at the same time for some sec-
8
onds.
2. The hour digits flash.
3. Turn the programme knob to
change the hour.
4. Touch button
lection.
at
5. The minute digits flash.
6. Turn the programme knob to
change the minutes.
7. Touch button
lection.
2. Connect the mains plug to the
mains socket.
memorised programme. The pro-
gramme indicator comes on.
3. The indicator of button
with red colour.
6 to confirm the se-
to confirm the se-
6
9 and the button
6 to confirm the se-
6 to confirm the se-
flashes
6