All manuals and user guides at all-guides.com
2
1
THE INLET HOSE FILTER AND
THE VALVE FILTER
It could be necessary to clean the filters
when:
• The appliance does not fill with wa-
ter.
• The appliance fills with the water for
a long time.
To clean the water inlet filters:
35°
EMERGENCY DRAIN
Because of a malfunction, the appliance
cannot drain the water.
If this occurs, do steps (1) through (6) of
'To clean the drain pump'.
9. Clean the filter under the water tap
10. Make sure that you tighten correct-
11. Put the flap back and close the
1. Close the water tap.
2. Remove the water inlet hose from
3. Clean the filter in the inlet hose
4. Remove the inlet hose behind the
5. Clean the filter in the valve with a
6. Install again the inlet hose. Make
7. Open the water tap.
45°
and put it back in the pump into
the special guides.
ly the filter to prevent leakages.
drain pump door.
• The indicator of button
and the display shows the related
alarm. Refer to 'Troubleshooting'.
WARNING!
Disconnect the mains plug from
the mains socket.
the water tap.
with a stiff brush.
appliance.
stiff brush or a towel.
sure that the couplings are tight to
prevent leakages.
If necessary, clean the pump.
Put the drainage duct back and close
the drain pump flap.
ENGLISH
29
flashes
6