Resistance Measurements - Klein Tools MM700 Manual De Instrucciones

nG inStructionS
AC measurement. To measure DC, press
between AC and DC modes. The AC
ates which mode is selected.
ppropriate jacks and rotate function
appropriate setting as follows:
ma and <10a: Insert RED test lead into
test lead into COM jack , and rotate
4
to the 10A AC/DC setting.
2
400ma: Insert RED test lead into
CK test lead into COM jack
4
witch to the mA AC/DC
2
µa: Insert RED test lead into
CK test lead into COM jack
4
witch to the µA AC/DC
2
All manuals and user guides at all-guides.com
1.
2. To measure current: Remove power from circuit, open circuit at
measurement point, connect meter in-series in the circuit using
the test leads, and apply power to circuit.The meter will auto-
range to display the measurement in the most appropriate range.
Do not attempt to measure more than 10a.
When measuring currents greater than 6a, a measurement
time of 30 seconds followed by 10 minutes of recovery time
is recommended.
continuity
1. Insert RED test lead into VΩ jack
into COM jack
Continuity/Resistance/Diode/Capacitance
note: The meter defaults to Continuity testing in this mode. Ensure
that the Continuity Testing icon
press the "SEL" button
2. Remove power from circuit.
3. Test for continuity by connecting conductor or circuit with test
leads. If resistance is measured less than 50Ω, an audible signal
will sound and display will show a resistance value indicating
continuity. If circuit is open, display will show "ol".
, and
setting.
Do not attempt to measure continuity on a live circuit.

reSiStance MeaSureMentS

1. Insert RED test lead into VΩ jack
, and
into COM jack
setting.
Continuity/Resistance/Diode/Capacitance
note: The meter defaults to Continuity testing in this mode. To
enter Resistance testing mode, press the "SEL" button
The Resistance icon will appear on the display.
2. Remove power from circuit.
3. Measure resistance by connecting test leads to circuit. The
meter will auto-range to display the measurement in the most
appropriate range.
MM700-1390112ART.indd 13
Dwg Name: MM700-1390112ART
Dwg No: 1390112
ECO No: 20617
Pkg Dwg Ref: 1290186
Color Reference: N/A
operatinG inStructionS
, and BLACK test lead
5
, and rotate function selector switch
4
is visible on the display. If not,
until the icon appears.
11
Black lead Red lead
, and BLACK test lead
5
, and rotate function selector switch
4
Rev: E
to the
2
setting.
to the
2
setting.
once.
11
13
9/21/2015 2:44:53 PM