nG inStructionS
with adapter into the VΩ
and COM
5
kings on thermocouple and meter), and
ch
to the Temperature
2
Fahrenheit scale in this mode. To enter
L" button
once. Ensure that the
11
or °C ) appears on the display. Default
hanged by powering on the meter with
ssed.
make contact between the
object being measured. When
ect are in thermal equilibrium, the
lay will stabilize. The meter will auto-
surement in the most appropriate range.
before switching meter to other
s.
uded with the original purchase
atures below 356°f / 180°c only. to
eratures, a k-type thermocouple
measurement range should be used.
resentation of the measurement. It responds
tely 3-5 times faster than the digits in the
circumstances, may allow the user to have
in the property being measured. In any
s from zero on the left hand side to the
n the right hand side of the display.
All manuals and user guides at all-guides.com
Battery replaceMent
4
When
indicator is displayed on LCD, batteries must be replaced.
1. Remove screw from battery/fuse door.
setting.
2. Replace 2 x AAA batteries (note proper polarity).
3. Replace battery/fuse door and fasten securely with screw.
fuSe replaceMent
A fuse may blow if more than 500mA is applied to the μA/mA jack
or more than 10A is applied to the 10A jack
1. Remove screw from battery/fuse door.
2. Replace blown fuse(s) with:
μa/ma jack
10a jack
3. Replace battery/fuse door and fasten securely with screw.
500mA/1000V fast-blow fuse
(Klein Cat. No. 69035)
to avoid risk of electric shock, disconnect leads from any voltage
source before removing battery/fuse door.
to avoid risk of electric shock, do not operate meter while
battery/fuse door is removed.
MM700-1390112ART.indd 17
Dwg Name: MM700-1390112ART
Dwg No: 1390112
ECO No: 20617
Pkg Dwg Ref: 1290186
Color Reference: N/A
Maintenance
3
: 500mA/1000V fast-blow (Klein Cat. No. 69035)
6
: 10A/1000V fast-blow (Klein Cat. No. 69034)
3
10A/1000V fast-blow fuse
(Klein Cat. No. 69034)
Rev: E
,
6
. To access fuses:
17
9/21/2015 2:44:58 PM