Klein Tools MM700 Manual De Instrucciones página 14

All manuals and user guides at all-guides.com
enGliSH
Black lead
note: When in a Resistance setting and the test leads are open
(not connected across a resistor), or when a failed resistor is under
test, the display will indicate O.L. This is normal.
Do not attempt to measure resistance on a live circuit.
DioDe teSt
1. Insert RED test lead into VΩ jack
into COM jack
Continuity/Resistance/Diode/Capacitance
note: The meter defaults to Continuity testing in this mode. To
enter Diode testing mode, press the "SEL" button
Diode icon will appear on the display.
2. Touch test leads to diode. A reading of 200-700mV on display
indicates forward bias, "ol" indicates reverse bias. An open
device will show "ol" in both polarities. A shorted device will
show approximately 0mV.
Black lead
14
MM700-1390112ART.indd 14
Dwg Name: MM700-1390112ART
Dwg No: 1390112
ECO No: 20617
Pkg Dwg Ref: 1290186
Color Reference: N/A
operatinG inStructionS
Red lead
, and BLACK test lead
5
, and rotate function selector switch
4
Red lead
Rev: E
to the
2
setting.
twice. The
11
9/21/2015 2:44:54 PM