Cableado De Campo - LiftMaster ELITE CSW200UL Serie Manual De Instalación

Protección contra incendios y electrocución:
DESCONECTE la alimentación (CA o solar y batería) ANTES de instalar o
l
dar servicio al operador.

Cableado de campo

PLUG-IN LOOP DETECTOR
Model LOOPDETLM
EXPANSION BOARD
INTERRUPT
LOOP
SHADOW LOOP
EXIT LOOP
CABLES ADICIONALES
NOTE: These switches determine if the
corresponding photoelectric sensor or edge
sensor will function for the OPEN or CLOSE cycle.
NOTE: These switches control how
the Auxiliary Relays will function.
AUXILIARY AUXILIARY
RELAY 1 RELAY 2
Protección continua contra incendios:
Sustituya SOLO por un fusible del mismo tipo y capacidad.
l
CONTROL BOARD
N.C.
N.C.
COM
ACCESSORY
POWER
24 Vdc 500 mA
Maximum
WIRELESS EDGE
PHOTOELECTRIC SENSORS
PHOTOELECTRIC SENSORS or
EDGE SENSORS
SINGLE BUTTON
CONTROL STATION
3-BUTTON
N.C.
CONTROL STATION
40
OPEN and COM: Hard Open (line-of-sight)
CLOSE and COM: Hard Close (line-of-sight)
STOP and COM: Hard Stop (line-of-sight)
EXIT: Soft Open (used for exit probe,
telephone entry, external exit loop detector,
3-BUTTON
or any device that would command the
CONTROL
gate to open)
STATION
FIRE DEPARTMENT
INTERRUPT LOOP or
PHOTOELECTRIC SENSORS
EXIT LOOP
for CLOSE cycle
SHADOW LOOP
EDGE SENSOR for CLOSE cycle
Maglock
(Optional)
(Not Provided)
JUNCTION BOX
Incoming Power
EDGE SENSOR or
PHOTOELECTRIC
SENSORS
for OPEN cycle
Shielded Twisted Pair Cable
(Primary/Secondary link to
other gate operator) Ground
the shield of the cable to the
chassis ground of each
operator.
HEATER