Connecting/Disconnecting A Phone - Renault Radio Connect R & GO Manual Del Usuario

CONNECTING, DISCONNECTING A PHONE
Connecting a paired phone
Your phone must be connected to the
hands-free phone system in order to
use all its functions.
No phone can be connected to the
hands-free phone system if it has not
first been paired.
Refer to the paragraph entitled "Pairing
a phone" in the "Pairing/unpairing a
phone" section.
Note: the Bluetooth® connection on
your phone must be activated.
Automatic connection
As soon as the phone system is
switched on, the hands-free kit
searches for paired telephones in the
vicinity.
Note: the priority phone is the last to
have been connected.
Searching will continue until a paired
phone is found (this may take up to five
minutes).
GB.20
All manuals and user guides at all-guides.com
(1/2)
Note:
– with the ignition on, the phone is
connected automatically. It may be
necessary to activate the automatic
Bluetooth® connection function on
your phone's hands-free system. To
do this, refer to your phone's user
manual;
– when reconnecting, and when two
paired phones are within range
of the hands-free system, the last
phone previously connected will take
priority, even if this phone is outside
the vehicle but within range of the
hands-free system.
Note: if a call is already in progress
when your hands-free phone system is
connected, the phone will automatically
be connected and the conversation will
switch to the vehicle speakers.
Scan devices
Pair device
Sel.device
Manual connection (changing the
phone connected)
Display the phone settings menu by
pressing 7, then select the "Sel.device"
menu. You will find the list of phones al-
ready paired.
Select the telephone from the list and
confirm by pressing 6. A message will
indicate that the phone is connected.
NB: If a phone is already connected
when changing phones in the already
paired phone list, the existing connec-
tion is automatically disconnected.