System Settings; Audio Settings - Renault Radio Connect R & GO Manual Del Usuario

SYSTEM SETTINGS (1/3)

Audio settings

Display the settings menu by pres-
sing 2. Select "Audio settings" by tur-
ning 6 and then press 6. The available
settings are:
– sound;
– auxiliary;
– Speed Dependent Volume Control
(SDVC);
– Bass Boost;
– Default audio.
Sound
Select "Sound" and press 6 to access
the different sections in the following
order:
– Bass;
– Treble;
– Balance (distribution of left/right
audio);
– FADER (front/rear balance).
You can change the value of each set-
ting by turning the dial 6. Press 6 to
confirm and return to the previous se-
lection.
The display indicates the type of setting
(Bass, Treble, Balance, Fader).
All manuals and user guides at all-guides.com
You can exit the menu by pressing 10.
Auxiliary (AUX IN)
Display the settings menu by pres-
sing 2. Select "Audio settings" and then
press 6.
Turn 6, then select "AUX In" to access
the different sections in the following
order:
– Low;
– Middle;
– High.
The values for each setting are as fol-
lows:
– Low (1200 mV);
– Middle (600 mV);
– High (300 mV).
Speed Dependent Volume Control
The audio volume of the system varies
with the vehicle speed.
Go to the "Audio settings" menu, then
confirm "Speed Vol." by pressing 6.
Adjust the volume/speed ratio by tur-
ning and pressing 6 to achieve the de-
sired ratio.
Bass Boost
The "Bass Boost" function increases
the bass levels.
To activate/deactivate this function,
select "ON" or "OFF" by turning and
pressing 6.
Default audio
Display the settings menu by pres-
sing 2. Select "Audio settings" and then
press 6 to display the Settings menu
and select "Default audio".
Confirm your selection by pressing 6.
All the audio settings return to their de-
fault values.
For safety reasons, carry
out any adjustments when
the vehicle is stationary.
GB.25